![]() ![]() *NOTE : If you are unable to Reset the Tire Pressure Warning Light on the first try, REPEAT the steps. In addition, if the tire pressure warning light stays illuminated past a week, you will need to have your vehicle serviced as there could possibly be a sensor issue or a tire puncture. Simply be patient and give the tires time to adjust. Keep in mind, the outdoor temperature affects how fast the air in the tires will adjust to the proper temperature, this could take minutes to several days. Make sure the spare has the correct amount of air as well.Fill each tire to the recommended PSI/Air Pressure Levels.Refer to the Manufacturer’s Sticker located on the inside of the Driver’s door.Follow one of the options below to re-initialize the TPMS. Use the OBDII module to retrieve the Honda DTC TPMS information to diagnose and service the TPMS issues determined.If the Tire Pressure Management System in the Honda Odysse y is not working properly, you may have to reset the system. After selecting the Make, Model, and Year, select the DTC code icon. Use the VT56 to retrieve Honda TPMS DTC codes by selecting the “Service” icon. This process can take 1-10 miles of continuous driving.” TPMS DTC code information ![]() After sensor IDs are registered to the vehicle, the MIL (malfunction indicator light) will flash until the vehicle is driven and the sensor IDs are received by the vehicle. The order is left front, left rear, right rear and right front sensor during the TPMS activation process.Īs cited in the TIA TPMS relearn chart, for Direct TPMS Honda systems 2008-2012, “a properly formatted TPMS scan tool is required to learn new sensor IDs when replacing sensors. When activating sensors, start with the left front sensor, then go counter-clockwise. The Honda Odyssey’s direct TPMS OBD relearn is unique compared to other OBD relearns. The calibration process will complete automatically.Use the arrows to select Calibration, then push the SELECT/RESET button.Push the SELECT/RESET button until options for the Cancel and Calibrate is displayed. ![]()
0 Comments
Leave a Reply. |